T3 & Bay Windscreen Washer Jet upgrade

[Barry]

FINALLY got around to changing the washer jets. 

The washer jet to a Suzuki Alto fits a T3 
Part number 38480-56K00-000

It’s a 3 jet washer as oppose to an single jet. 
Takes a bit of fiddling to get it all on the screen but well worth the hassle. 

Only issue I had was the van had had some front damage years ago and the shitty panel beater reused the old jets with some araldiite and contact cement. 
I managed to lift some paint in the change over. 

Anyway - definitely worth the upgrade

OLD

   

NEW

   

[Barry]

Had a look at my bay today and they are the same washer jet. 

Now I just need to get my washer working on the bay 

JK list them and the same part

https://www.justkampers.com.au/washer-je...-jets.html

[Oldman]

Now THAT'S a great upgrade....and simple too.

[Barry]

Don’t know what the Bays are like for tube access from the inside but it’s a “dash out” if you don’t keep hold of the tube on the T3

Baby bulldog clip was my answer

[Oldman]

Access from inside is tight….but doable.
I’ve always eased them out, connected the replacements and pushed back in.
Don’t need a lot of slack in the tubes…
A pair of locking forceps helps hold the tube and prevent it retracting into the dash pod, black hole…..l

[Barry]

Here I was thinking I was smart - but JK sold them all along

https://www.justkampers.com.au/reconditi...split.html

Need to do this to my bay as it works a treat on the T3

[Oldman]

I’ll be getting a pair of those…..
(We’re never as smart as we think we are mate !)

[KIWI]

Here I was thinking I was smart - but JK sold them all along

https://www.justkampers.com.au/reconditi...split.html

Need to do this to my bay as it works a treat on the T3

Or even better, save yourself $3...
Washer jet pair
PR