Kombi Club Australia

FINALLY got around to changing the washer jets. 

The washer jet to a Suzuki Alto fits a T3 
Part number 38480-56K00-000

It’s a 3 jet washer as oppose to an single jet. 
Takes a bit of fiddling to get it all on the screen but well worth the hassle. 

Only issue I had was the van had had some front damage years ago and the shitty panel beater reused the old jets with some araldiite and contact cement. 
I managed to lift some paint in the change over. 

Anyway - definitely worth the upgrade

OLD

[attachment=5275]

NEW

[attachment=5276]

Had a look at my bay today and they are the same washer jet. 

Now I just need to get my washer working on the bay 

JK list them and the same part

https://www.justkampers.com.au/washer-je...-jets.html

Now THAT'S a great upgrade....and simple too.

Don’t know what the Bays are like for tube access from the inside but it’s a “dash out” if you don’t keep hold of the tube on the T3

Baby bulldog clip was my answer

Access from inside is tight….but doable.
I’ve always eased them out, connected the replacements and pushed back in.
Don’t need a lot of slack in the tubes…
A pair of locking forceps helps hold the tube and prevent it retracting into the dash pod, black hole…..l

Here I was thinking I was smart - but JK sold them all along

https://www.justkampers.com.au/reconditi...split.html

Need to do this to my bay as it works a treat on the T3

I’ll be getting a pair of those…..
(We’re never as smart as we think we are mate !)

(14-04-2024, 08:45 AM)Barry Wrote: [ -> ]Here I was thinking I was smart - but JK sold them all along

https://www.justkampers.com.au/reconditi...split.html

Need to do this to my bay as it works a treat on the T3

Or even better, save yourself $3...
Washer jet pair
PR