Fuel Hose

[syncro]

I use 5.6mm fuel injection hose

I buy it from advanced fluid solutions (aka siicone hose world on ebay)

https://www.ebay.com.au/itm/250591433961

I've just ordered 2m as JK Australia are out of stock. First time in years that I have used eBay and things have changed. Postage really has gone up.

[Tintop]

as far as I know Justkampers doesn't have R9 hose anyway

you don't need R9 but I prefer it

[syncro]

as far as I know Justkampers doesn't have R9 hose anyway

you don't need R9 but I prefer it

I really cannot see any benefit in using high pressure fuel hose which is not as flexible. I worry about damage to my nipples. I did see a comment once that is more resistant to abrasion. Really if it is installed correctly there should not be a problem. Unlike mine that the hose is rubbing on the CV joint.

[Tintop]

   

[rstucke]

Full article, useful info

Fuel Hose Selection, Pipe Grading (Why R9), Connections & Clipping (volksbolts.com)

[Oldman]

Full article, useful info

Fuel Hose Selection, Pipe Grading (Why R9), Connections & Clipping (volksbolts.com)

That’s a good read Rick….copied and is now a Stickie.....thanks.

[rstucke]

That’s a good read Rick….copied and is now a Stickie.....thanks.

Thank Tintop
His post made me search for it
His idea of using R9 is what I agree with
R6 (lower pressure)is also E10 tolerant but is more (much more) permeable which means fuel goes into the wall of the hose.
my recommendation (as is Tintop's) R9 is the way to go and have it through out my fuel system

[Oldman]

Thanks Patrick !! 

[Oldman]

Is there a retailer for the R9 in Australia, or is it import only ?

[rstucke]

Is there a retailer for the R9 in Australia, or is it import only ?

JK for r6
Bursons for r9