21-12-2022, 09:27 AM
I have a stock bull bar as supplied with a Sopru Campmobile .
There are angles that run transversely between the bent tubing, front and rear.
The rear angle is bolted directly to the chassis members
The front angle is bolted to another angle that is concealed by the bumper. This angle is, in turn bolted to the “Duck Bill” compression section.
This one is a bit harder to make out…….
Hope that helps……
There are angles that run transversely between the bent tubing, front and rear.
The rear angle is bolted directly to the chassis members
The front angle is bolted to another angle that is concealed by the bumper. This angle is, in turn bolted to the “Duck Bill” compression section.
This one is a bit harder to make out…….
Hope that helps……
Cheers,
Mark
It’s not oil, it’s sweat from all the horsepower !
Pit crew for : The Tardis - a ‘76 Sopru Campmobile
& Herman - the ‘71 White Low Light
Mark
It’s not oil, it’s sweat from all the horsepower !
Pit crew for : The Tardis - a ‘76 Sopru Campmobile
& Herman - the ‘71 White Low Light