+- Kombi Club Australia (https://kombiclubaustralia.com)
+-- Forum: Help & Assistance (https://kombiclubaustralia.com/forumdisplay.php?fid=27)
+--- Forum: Bay Tech Clinic (https://kombiclubaustralia.com/forumdisplay.php?fid=8)
+---- Forum: Body (https://kombiclubaustralia.com/forumdisplay.php?fid=41)
+---- Thread: Bull Bar install (/showthread.php?tid=406)
Pages:
1
2
Bull Bar install - kombiPOP - 19-12-2022
does anyone have a bull bar on a 75 model they could take a pic underneath showing how and where the bull bar bolts on
RE: Bull Bar install - Oldman - 19-12-2022
I have 76 and will take a pic tomorrow…..a bit dark now.
RE: Bull Bar install - KIWI - 20-12-2022
(19-12-2022, 05:35 PM)kombiPOP Wrote: does anyone have a bull bar on a 75 model they could take a pic underneath showing how and where the bull bar bolts on
Mine was welded to the bumper and the chassis where the cover plate under the pedal cluster is bolted on.
Butcher's job so now removed.
PR
RE: Bull Bar install - Oldman - 20-12-2022
Apologies, today has been a blur……..will get a pic up tomorrow
RE: Bull Bar install - kombiPOP - 21-12-2022
(20-12-2022, 05:42 PM)Oldman Wrote: Apologies, today has been a blur……..will get a pic up tomorrow
cheers mate
RE: Bull Bar install - Oldman - 21-12-2022
I have a stock bull bar as supplied with a Sopru Campmobile .
There are angles that run transversely between the bent tubing, front and rear.
The rear angle is bolted directly to the chassis members
The front angle is bolted to another angle that is concealed by the bumper. This angle is, in turn bolted to the “Duck Bill” compression section.
This one is a bit harder to make out…….
Hope that helps……
RE: Bull Bar install - kombiPOP - 21-12-2022
Hi mate, thanks 4 th pics, unfortunately my bull bars are different to urs,
RE: Bull Bar install - Oldman - 21-12-2022
No problem……
RE: Bull Bar install - kombiPOP - 21-12-2022
(21-12-2022, 11:40 AM)Oldman Wrote: No problem……
this bull bar doesnt fit my 75 kombi, do you know what type it would fit
RE: Bull Bar install - Oldman - 21-12-2022
(21-12-2022, 02:44 PM)kombiPOP Wrote: this bull bar doesnt fit my 75 kombi, do you know what type it would fit
If it doesn't fit a Late Bay ('72 - '79), it is most likely for a Lowlight ('68 - '72).
'72 was a crossover year....low, front indicators but tall rectangular rear tail light assemblies and upper air intakes rather than the rear oval tail lights and curved intakes of the Lowlights.
Is that your bus in the pic ?
Looks like something has been modified to the front clip ....? From that angle it looks like the Duckbill has been cut off...? Would explain why that bar wouldn't fit......
Maybe if you could take a pic of the front so we can get a better idea...