25-06-2023, 12:45 PM
So needed to work out how to fit this engine into my test bed as the test bed has a vw bell housing to hold engines
I was able to source a surplus Forester box which I cut the front off, machined it flat, cut a 6mm aluminium plate to fit and welded the whole thing together. Worked out the centre of the engine and bolted the new bell housing to the arbor that fits into the test bed.
I was able to source a surplus Forester box which I cut the front off, machined it flat, cut a 6mm aluminium plate to fit and welded the whole thing together. Worked out the centre of the engine and bolted the new bell housing to the arbor that fits into the test bed.