Shift Coupler

[Mark D]

AFAIK not normally. 

I only use CB Rhino bushes in OG housings. 

The CB is the same as CSP

https://www.cbperformance.com/product-p/6110.htm

Thanks Barry. It doesn't seem right to me. 3mm at the coupling would probably translate to 100mm at the gear knob.
I restored a Manx Tow'd a couple of years ago and it had the same play, so I fabricated 2 new bushes out of teflon on the bench router and it made a heap of difference at the shifter.......maybe I'll do the same for this one.
                                                                                         
                                                                                                Mark