![]() |
Original VW Sopru fridge/stove/sink cabinet - Printable Version +- Kombi Club Australia (https://kombiclubaustralia.com) +-- Forum: Help & Assistance (https://kombiclubaustralia.com/forumdisplay.php?fid=27) +--- Forum: Buying & Selling Help (https://kombiclubaustralia.com/forumdisplay.php?fid=36) +--- Thread: Original VW Sopru fridge/stove/sink cabinet (/showthread.php?tid=912) |
Original VW Sopru fridge/stove/sink cabinet - Doob - 11-06-2024 For Sale: Original VW Sopru fridge/stove/sink cabinet – Make an offer. Removed from our early VW Sopru Campmobile many years ago and put into dry storage. Includes the original cabinet, (in good shape for its age), Electrolux fridge model RAM23a. Prod No 9263527 (it will need an inspection, new seals, service & recharge), cutlery drawer and small sink WITH the plug! Also, a Primus 2 burner gas stove (probably not the original stove for this Sopru cabinet). I was intending to refurbish and reinstall all this but have needed to change plans. Make me an offer – it needs a new home. Pickup from Como WA. Photos attached : RE: Original VW Sopru fridge/stove/sink cabinet - Oldman - 11-06-2024 Is the fridge a three way absorption unit ? ie 240v, 12v, gas ? Would help potential new owners to know…… RE: Original VW Sopru fridge/stove/sink cabinet - Doob - 11-06-2024 Good point Mark. Yes, it is an old Electrolux absorption fridge (no electric motor & compressor). Made in England - probably in the late 1960's to early 1970's ...I guess? It is powered by either 240v or Gas (propane). No provision for 12v that I am aware of. I can not give any guarantees on the fridge. It would need to be inspected, serviced and recharged at a service centre. I was thinking people might be more interested in the original Sopru cabinet that is still in reasonable condition. Cheers Grant attached photo of the back of the fridge. RE: Original VW Sopru fridge/stove/sink cabinet - Oldman - 11-06-2024 Thanks Grant….. These old absorption fridges are awesome ! I’m still using my original from ‘76. I hope someone appreciates the provenance of what you are offering . ![]() RE: Original VW Sopru fridge/stove/sink cabinet - Busso Bus - 12-06-2024 I'm also still using my old Electrolux 3way in my 74 Sopru, just a little trick with these fridges, if they haven't been used for a while the refrigerant liquids seperate so turn fridge upside down a few times to remix liquids & good to go. Cheers Shane RE: Original VW Sopru fridge/stove/sink cabinet - syncro - 12-06-2024 (12-06-2024, 09:05 AM)Busso Bus Wrote: I'm also still using my old Electrolux 3way in my 74 Sopru, just a little trick with these fridges, if they haven't been used for a while the refrigerant liquids seperate so turn fridge upside down a few times to remix liquids & good to go. Cheers Shane Good idea but make sure that you leave them vertical overnight before turning them on. RE: Original VW Sopru fridge/stove/sink cabinet - Doob - 15-06-2024 The Sopru fridge cabinet has gone to a new home - and to a gentleman that appreciates it. I am very pleased ![]() RE: Original VW Sopru fridge/stove/sink cabinet - Oldman - 15-06-2024 Niiiice !! Great to pass things on to those that appreciate them. RE: Original VW Sopru fridge/stove/sink cabinet - Mr Beckstar - 16-06-2024 (12-06-2024, 09:05 AM)Busso Bus Wrote: I'm also still using my old Electrolux 3way in my 74 Sopru, just a little trick with these fridges, if they haven't been used for a while the refrigerant liquids seperate so turn fridge upside down a few times to remix liquids & good to go. Cheers Shane Thanks for the tip! I'm thinking though, it's not exactly a quick job to get the fridge out and do that and then get it back in. How long would you define as "a while"? RE: Original VW Sopru fridge/stove/sink cabinet - Oldman - 16-06-2024 Overnight is usually sufficient, Chris. All the remixed liquid needs to drain back down through the plumbing…. When I removed my 3 way to do this, I thought it’d be quite a task……turned out that it was secured to the cabinet with just a couple of fine thread screws…..took about 5 minutes to release it and another 10 to undo the gas and wiring required to free it completely. Very simple really…… |