Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Power steering play
#1
I have a bit of end play in the power steering unit / pump

Gathering it will need a rebuild. 
Can you shim it out?
Any recommendations in Sydney for a rebuild?
76 Bay Microbus - Woody
90 T3 Caravelle C Auto - Daisy
Reply
#2
(29-12-2022, 11:13 AM)Barry Wrote: I have a bit of end play in the power steering unit / pump

Gathering it will need a rebuild. 
Can you shim it out?
Any recommendations in Sydney for a rebuild?

Try Steve Muller, he will be able to advise you.
Reply
#3
Thanks Les
76 Bay Microbus - Woody
90 T3 Caravelle C Auto - Daisy
Reply
#4
(03-01-2023, 02:09 PM)Barry Wrote: Thanks Les

Hi Barry did you get a result with the power steering?
Reply
#5
Sort of. 
I spoke with my mechanic about it and he said it wasn’t enough to worry about. 

Just saving some pennies and I’ll grab a new pump from Brickwerks
76 Bay Microbus - Woody
90 T3 Caravelle C Auto - Daisy
Reply
#6
Where is the play? In the pump, or in the steering rack?
Reply
#7
Andy
There is about 1mm(?) of endplay I’m the pulley. 
Not leaking fluid or making noises.
76 Bay Microbus - Woody
90 T3 Caravelle C Auto - Daisy
Reply
#8
That's interesting to have that much play in the pump. I've not had one apart before, but if there is that much movement internal to the gear pump, I would assume it's unlikely to generate enough flow and pressure to help with steering.
With a power steering setup, they have very heavy to steer when the pump is not working!

Would be good to have a dead pump to open up and have a look at!
Reply
#9
Andy

Steering is perect feel.
Driven these for 20 years so I'm use to small changes in feel.
I'll chech what the movement really is.
Could be a lot less, but you do hear a "click - click"
76 Bay Microbus - Woody
90 T3 Caravelle C Auto - Daisy
Reply
#10
Hope it's not like mine, I forgot to tighten the pulley and lost it not long into a trip away, I drove for a week with no power steering. Not much fun!
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)