too much play in steering wheel

[Wayne Murray]

It looks like the negative horn wire. Which goes from the bottom of your steering column. It should be a firm push on fitting not a loose one. It is a real b1*#H to get on the wire to the bottom of the steering column. As the wire should go through a metal loop inside base plate, at the bottom of the steering column on the inside and then onto a push on terminal on the bottom of the column. The terminal at the bottom of the steering column is often broken off and needs to be replaced to make the horn work or as people do reroute the wire. That same wire then should run to the horn itself. I don't see the other wire that runs down the centre of the steering column shaft and goes onto the inside of the steering coupler bolt hole under the washer, on the steering box side.