13-07-2023, 09:12 AM
only an issue when you push the brake pedal - no leak until then. web points to faulty seal / corrosion b/w booster and master cylinder or booster diaphragm holed.
it does not seem that hard to remove the booster to check - but is there a way around having to disconnect the hyd lines from the master cylinder, i really dont want to bleed the system as its not required ATM and a real pain.
any tips / pointers for this issue would be appreciated.
i see new boosters are available if that is required, has anyone had luck with re sealing the junction b/w the booster and master cylinder?
thanks, Bruce
it does not seem that hard to remove the booster to check - but is there a way around having to disconnect the hyd lines from the master cylinder, i really dont want to bleed the system as its not required ATM and a real pain.
any tips / pointers for this issue would be appreciated.
i see new boosters are available if that is required, has anyone had luck with re sealing the junction b/w the booster and master cylinder?
thanks, Bruce