My engine is finished, very happy to have it home .
Mocking up tins and will give them another coat of satin black when done .
Specs for those interested ;
84x90.5
55thou decks
9.23:1 CR
56cc chambers
FK65 / 1.4:1 ratio Rockers
CB crank and H beam rods
Mahle forged slugs with total seal rings and lightened pins
044 Mex semi hemi heads with Manley SS valves , David Butler reco and 3 angle seats
44 idf webers on CSP manifolds
123 vac adv dizzy
Stock flywheel / stage 1 Kennedy P/plate
Should pull the bend out of a river and will work a treat with my 3 to 4th ratios on the Freeway flyer box
![[Image: IMG-1741.jpg]](https://i.postimg.cc/zvZvq1fq/IMG-1741.jpg)
[/url]
Mocking up tins and will give them another coat of satin black when done .
Specs for those interested ;
84x90.5
55thou decks
9.23:1 CR
56cc chambers
FK65 / 1.4:1 ratio Rockers
CB crank and H beam rods
Mahle forged slugs with total seal rings and lightened pins
044 Mex semi hemi heads with Manley SS valves , David Butler reco and 3 angle seats
44 idf webers on CSP manifolds
123 vac adv dizzy
Stock flywheel / stage 1 Kennedy P/plate
Should pull the bend out of a river and will work a treat with my 3 to 4th ratios on the Freeway flyer box
![[Image: IMG-1741.jpg]](https://i.postimg.cc/zvZvq1fq/IMG-1741.jpg)
![[Image: IMG-1737.jpg]](https://i.postimg.cc/76vmNLV3/IMG-1737.jpg)