08-03-2023, 06:08 PM
Remove the winder, door pull and door opening levers……work your way around the door card with a nylon scraper, or similar, to pop the door card clips out of their holes and remove the door card…..now you’ll get a good look at the aftermath.
Very good chance that the bracket that is spot welded to the lifting channel has sheared off/failed, causing the glass to drop. If you loosen the bolts that whole winder actuator mechanism, you should be able to relieve some of the pressure on the glass……..go slowly, you’ll get there !
Very good chance that the bracket that is spot welded to the lifting channel has sheared off/failed, causing the glass to drop. If you loosen the bolts that whole winder actuator mechanism, you should be able to relieve some of the pressure on the glass……..go slowly, you’ll get there !
Cheers,
Mark
It’s not oil, it’s sweat from all the horsepower !
Pit crew for : The Tardis - a ‘76 Sopru Campmobile
& Herman - the ‘71 White Low Light
Mark
It’s not oil, it’s sweat from all the horsepower !
Pit crew for : The Tardis - a ‘76 Sopru Campmobile
& Herman - the ‘71 White Low Light