05-07-2022, 03:21 PM
Wanted to get the steering box raise done ready for the inner front valance to be put in place. I decided to fabricate a new box section instead of the usual cut and shift. I had two sections of 2.2mm steel folded up and got to work with the raise. I had originally purchased a wagenswest raise kit and I used the template to trace the angle that the box needed to follow as it went up and back. Original crush tube used for the clutch pedal pivot. All welded together and ready to install.
![[Image: 2280899.jpg]](https://www.thesamba.com/vw/gallery/pix/2280899.jpg)
![[Image: 2280898.jpg]](https://www.thesamba.com/vw/gallery/pix/2280898.jpg)
![[Image: 2280897.jpg]](https://www.thesamba.com/vw/gallery/pix/2280897.jpg)
![[Image: 2280907.jpg]](https://www.thesamba.com/vw/gallery/pix/2280907.jpg)
![[Image: 2280906.jpg]](https://www.thesamba.com/vw/gallery/pix/2280906.jpg)
![[Image: 2280905.jpg]](https://www.thesamba.com/vw/gallery/pix/2280905.jpg)
![[Image: 2280893.jpg]](https://www.thesamba.com/vw/gallery/pix/2280893.jpg)
![[Image: 2280892.jpg]](https://www.thesamba.com/vw/gallery/pix/2280892.jpg)
![[Image: 2280891.jpg]](https://www.thesamba.com/vw/gallery/pix/2280891.jpg)
![[Image: 2280899.jpg]](https://www.thesamba.com/vw/gallery/pix/2280899.jpg)
![[Image: 2280898.jpg]](https://www.thesamba.com/vw/gallery/pix/2280898.jpg)
![[Image: 2280897.jpg]](https://www.thesamba.com/vw/gallery/pix/2280897.jpg)
![[Image: 2280907.jpg]](https://www.thesamba.com/vw/gallery/pix/2280907.jpg)
![[Image: 2280906.jpg]](https://www.thesamba.com/vw/gallery/pix/2280906.jpg)
![[Image: 2280905.jpg]](https://www.thesamba.com/vw/gallery/pix/2280905.jpg)
![[Image: 2280893.jpg]](https://www.thesamba.com/vw/gallery/pix/2280893.jpg)
![[Image: 2280892.jpg]](https://www.thesamba.com/vw/gallery/pix/2280892.jpg)
![[Image: 2280891.jpg]](https://www.thesamba.com/vw/gallery/pix/2280891.jpg)
![[Image: 2280890.jpg]](https://www.thesamba.com/vw/gallery/pix/2280890.jpg)