05-07-2022, 02:32 PM
(This post was last modified: 05-07-2022, 02:33 PM by Mid West Dubber.)
Mid West Dubber Wrote:The next step was to counter sink the screw holes on the lense due to the counter sink on the bezel...
Because I had to grind so much off the edges of the lenses, I now had to space the lense back out to tack up the slack from the removed plastic. So I made up a spacer from a piece of alloy...
All screw together and satisfied with the result. Much nicer then the silver paint on the inside of the plastic. Plan on getting the second one finished off this coming weekend...
![[Image: 2%202_zpse8adegqs.jpg]](http://s1069.photobucket.com/user/midwestdubber1/media/63%20bus/Tail%20lights%202/2%202_zpse8adegqs.jpg.html)
![[Image: 2%203_zpscn2w3juc.jpg]](http://s1069.photobucket.com/user/midwestdubber1/media/63%20bus/Tail%20lights%202/2%203_zpscn2w3juc.jpg.html)
![[Image: 2%204_zpsc4d7pbye.jpg]](http://s1069.photobucket.com/user/midwestdubber1/media/63%20bus/Tail%20lights%202/2%204_zpsc4d7pbye.jpg.html)
![[Image: 2%207_zps3ym3a9xd.jpg]](http://s1069.photobucket.com/user/midwestdubber1/media/63%20bus/Tail%20lights%202/2%207_zps3ym3a9xd.jpg.html)
![[Image: 2%201_zpszzhhkuuv.jpg]](http://s1069.photobucket.com/user/midwestdubber1/media/63%20bus/Tail%20lights%202/2%201_zpszzhhkuuv.jpg.html)
![[Image: 2%205_zpsztqs7e5t.jpg]](http://s1069.photobucket.com/user/midwestdubber1/media/63%20bus/Tail%20lights%202/2%205_zpsztqs7e5t.jpg.html)
![[Image: 2%206_zps1xozpgi2.jpg]](http://s1069.photobucket.com/user/midwestdubber1/media/63%20bus/Tail%20lights%202/2%206_zps1xozpgi2.jpg.html)
Mid West Dubber Wrote:Got the tail lights finished off this weekend. I think they have turned out not too bad..
Spacer made..
![[Image: Spacer%202_zpsisoqdpe9.jpg]](http://s1069.photobucket.com/user/midwestdubber1/media/63%20bus/Tail%20lights%202/Spacer%202_zpsisoqdpe9.jpg.html)
![[Image: image1_zpsppjpskm4.jpg]](http://s1069.photobucket.com/user/midwestdubber1/media/63%20bus/Tail%20lights%202/image1_zpsppjpskm4.jpg.html)