08-12-2022, 05:00 PM
Slight gap is normal….inwards/outwards adjustment is by the roller bracket itself……..
I replaced mine with a pair of good quality roller bearings that were the same outside diameter….
Much smoother and better in my opinion than the blob of metal that is often supplied.
I replaced mine with a pair of good quality roller bearings that were the same outside diameter….
Much smoother and better in my opinion than the blob of metal that is often supplied.
Cheers,
Mark
It’s not oil, it’s sweat from all the horsepower !
Pit crew for : The Tardis - a ‘76 Sopru Campmobile
& Herman - the ‘71 White Low Light
Mark
It’s not oil, it’s sweat from all the horsepower !
Pit crew for : The Tardis - a ‘76 Sopru Campmobile
& Herman - the ‘71 White Low Light