04-07-2022, 01:08 PM
Now you don't
![[Image: schoolzookombi177.jpg]](http://i204.photobucket.com/albums/bb247/felixqld66/Oil%20change/schoolzookombi177.jpg)
While the oil was draining I cleaned up the oil screen.
![[Image: schoolzookombi171.jpg]](http://i204.photobucket.com/albums/bb247/felixqld66/Oil%20change/schoolzookombi171.jpg)
When the oil was all drained I put a smear of oil on the gasket of the oil filter and screwed it back on tightening it by hand only.
![[Image: schoolzookombi178.jpg]](http://i204.photobucket.com/albums/bb247/felixqld66/Oil%20change/schoolzookombi178.jpg)
The filterscreen was fitted back back in with the gasket in place and the nut was tightened with the tension wrench to 9ft/lbs.
The sump plug was also fitted with a compresion washer and tightened to 9ft/lbs by the wrench.
Refilling the motor was done in a few stages so as to not over fill it, checking the dipstick as I went.
Pretty easy job really, and a mate an I did my bus and his T3 in about an hour sharing the tools and learning as we went.
I reckon you could knock it over in 20 mins once you have done it the first time.
![[Image: schoolzookombi177.jpg]](http://i204.photobucket.com/albums/bb247/felixqld66/Oil%20change/schoolzookombi177.jpg)
While the oil was draining I cleaned up the oil screen.
![[Image: schoolzookombi171.jpg]](http://i204.photobucket.com/albums/bb247/felixqld66/Oil%20change/schoolzookombi171.jpg)
When the oil was all drained I put a smear of oil on the gasket of the oil filter and screwed it back on tightening it by hand only.
![[Image: schoolzookombi178.jpg]](http://i204.photobucket.com/albums/bb247/felixqld66/Oil%20change/schoolzookombi178.jpg)
The filterscreen was fitted back back in with the gasket in place and the nut was tightened with the tension wrench to 9ft/lbs.
The sump plug was also fitted with a compresion washer and tightened to 9ft/lbs by the wrench.
Refilling the motor was done in a few stages so as to not over fill it, checking the dipstick as I went.
Pretty easy job really, and a mate an I did my bus and his T3 in about an hour sharing the tools and learning as we went.
I reckon you could knock it over in 20 mins once you have done it the first time.