03-07-2022, 01:54 PM
And now I'm up to yesterday.
First job get the master cylinder out. Had 2 out of 3 lines loose during the week. Popped the reservoir out of the top. Need seals for that next. The last line wouldn't budge so wiggled and pulled it out through the frame from where I'd already disconnected it at the other end. And then got it undone in the vice! Yay.
Still pumps fluid so should be ok for a rebuild.
Then got on to passenger rear hub and pulled out the wheel cylinder.
Went around to drivers side... note to self... crack hub nut before putting kombi up on stands!
Put kombi back down, cracked hub nuts and wheel nuts, put kombi back up on stands.
Reminder to self, fix the f'n trolley jack. This using a bottle jack is tedious!
Now find the hub won't come off so lubricated the adjuster and will try today!
First job get the master cylinder out. Had 2 out of 3 lines loose during the week. Popped the reservoir out of the top. Need seals for that next. The last line wouldn't budge so wiggled and pulled it out through the frame from where I'd already disconnected it at the other end. And then got it undone in the vice! Yay.
Still pumps fluid so should be ok for a rebuild.
Then got on to passenger rear hub and pulled out the wheel cylinder.
Went around to drivers side... note to self... crack hub nut before putting kombi up on stands!
Put kombi back down, cracked hub nuts and wheel nuts, put kombi back up on stands.
Reminder to self, fix the f'n trolley jack. This using a bottle jack is tedious!
Now find the hub won't come off so lubricated the adjuster and will try today!