17-09-2022, 06:05 PM
In my opinion you have gone to that much trouble to get to where you are and a little bit more work to completely do a complete job. If it was me I'll would do the lot, including replacing all ball joints etc. If it's never been done before ,there is a lot of work to have to do it all again as you felt like it wasn't needed at the time. It is your decision to make and your money your spending. It's my opinion and what I would do on my Kombis
I would of removed the torsion arms on the car then remove beam, You may have to remove the upper bump stop to help with removal of torsion arm, not sure if their is a pain free method. You can also check your leave springs inside your front beam as well, do expect to find a few broken leave springs.
I would of removed the torsion arms on the car then remove beam, You may have to remove the upper bump stop to help with removal of torsion arm, not sure if their is a pain free method. You can also check your leave springs inside your front beam as well, do expect to find a few broken leave springs.
72 Kombi Microbus
72 Kombi Van
72 Kombi DC Ute
76 Kombi SC Ute
DenialĀ is a sign of quilt !
72
72 Kombi Van
72 Kombi DC Ute
76 Kombi SC Ute
DenialĀ is a sign of quilt !
72