Move T3 pop-top into QLD?

[Krazywaffle]

That DMT sticker is the same that I had. Issued in NSW. I don't think that Chris Band (owner of Camperize) ever had approval outside of NSW. The date that approval was issued means that they did not have to notify the RTA of the modification at that time. I think that the seat could be a problem in QLD as it does not have a steel frame. The seat could easily be replaced with a 2024 approved one. I don't know anything about the standards for the roof.

That must have sat around at TKM for a while. It is a July 1990 build and the compliance plate wasn't fitted until December 1991.

Thanks for the insight. While the DMT Type Approved won’t hold any water in QLD directly, the engineer said that if we could get document showing what testing was done to attain this DMT Type Approved from NSW (specifically seat test conditions) that such information could permit him to issue a QLD mod plate directly without need for further testing. Have a feeling that tracking down such a document is going to near-impossible though, but holding out hope that Transport NSW still has something on file regarding Approval 83131.