25-02-2024, 08:48 AM
Distance measured from bulkhead to back of steel square at back of base clips :
(Steel square blade = 51mm wide, so total distance from face of bulkhead to back of base clip = 105mm +51mm = 156 mm
Set-out for measurement :
Hope that helps......
(Steel square blade = 51mm wide, so total distance from face of bulkhead to back of base clip = 105mm +51mm = 156 mm
Set-out for measurement :
Hope that helps......
Cheers,
Mark
It’s not oil, it’s sweat from all the horsepower !
Pit crew for : The Tardis - a ‘76 Sopru Campmobile
& Herman - the ‘71 White Low Light
Mark
It’s not oil, it’s sweat from all the horsepower !
Pit crew for : The Tardis - a ‘76 Sopru Campmobile
& Herman - the ‘71 White Low Light